AC03DGM |
RFQ for AC03DGM Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| AC03DGM | - | . | N/A |
Typical Application |
Features |
| Noncontact switches of motor speed control, heatertemperature control, lamp light control | Gate trigger current (mode I, III, and IV) at 12 mA or less is guaranteed. This transistor features a small and lightweight package and is easy to handle even on the mounting surface due to its TO- 202AA dimensions. Processing of lead wires and heatsink (tablet) using jigs is also possible. High degrees-of-freedom applications design is available due to high gate trigger sensitivity and small hold current distribution. Employs flame-retardant epoxy resin (UL94V-0). |
| PARAMETER | SYMBOL |
AC03DGM | AC03FGM | Unit | Remarks |
|
Non-repetitive peak off-state voltage |
V DSM |
500 | 700 | V |
- |
| Repetitive peak off-voltage |
VDRM | 400 | 600 | V | Refer to Figures 11 and 12. |
| Effective on-state current |
IT(RMS) | 3 (TC = 92°C) |
A | Refer to Figure 2. | |
| Surge on-state current | ITSM | 30 (50 Hz 1 cycle) 33 (60 Hz 1 cycle) |
A | - | |
| Fusing current | FiT2 dt |
4.0 (1 ms t 10 ms) | A2S | - | |
| Critical rate of rise of on-state current |
dI /dt T |
40 | A/ s |
- | |
| Peak gate power dissipation | PGM | 3 (f 50 Hz, Duty 10 %) | W | - | |
| Average gate power dissipation | PG(AV) | 0.3 | W | - | |
| Peak gate current | IGM | ±0.5 (f 50 Hz, Duty 10 %) | A | - | |
| Junction temperature | Tj | -40 to +125 | °C | - | |
| Storage temperature | Tstg | -55 to +150 | °C | - | |
